top of page
Agua Series
a) Agua 20
Agua, a robust workhorse series of membranes from Theway Membranes, is made with special attention to fiber chemistry, distribution to be able to handle tough feed parameters. The innovative In-Out configuration of fibers is able to sustain high permeate fluxes and is designed to be cleaned by short bursts of backwash. This shorter module makes handling extremely easy, storage effortless and transport undemanding. These modules are suited for process and potable water ultrafiltration. This module is also suited for Effluent treatment. Module is suitable for Crossflow as well as Dead end filtration. Crossflow is recommended for longer and sustainable operation. Consult Theway Membranes for design and suitability. Read more about the module by clicking the button below.
b) Agua 40
Agua, a robust workhorse series of membranes from Theway Membranes, is made with special attention to fiber chemistry, distribution to be able to handle tough feed parameters. The optimized design of this module is a result of carefully engineered trade-offs between size,weight, per module surface area, and ease of handling, storage, transport and uniform flow distribution. These modules are suited for process and potable water ultrafiltration. This module is also suited for Effluent treatment. Module is suitable for Crossflow as well as Dead end filtration. Crossflow is recommended for longer and sustainable operation. Consult Theway Membranes for design and suitability. Learn more details about this module by clicking on the button below.
c) Agua 55
Agua 55, is the most widely adopted and used membrane in the Agua series of membranes from Theway Membranes. A sturdy and rugged membrane, Agua 55 is able to handle a wide spectrum of service expectations in different applications. This design and form factor achieves a high degree of commercial success, with it's size, weight & cost/m2 while retaining the advantages of its smaller cousins Agua 20 and Agua 40. The fiber chemistry is designed to be strong, be able to allow higher fluxes and able to take higher pressure and suspended solids shock loads. These modules are suited for process and potable water ultrafiltration. This module is also suited for Effluent treatment. Module is suitable for Crossflow as well as Dead end filtration. Crossflow is recommended for longer and sustainable operation. Consult Theway Membranes for design and suitability. Learn more about this module by clicking on the button below.
d) Agua 64
Agua 64, from Theway Membranes is the latest addition in the Agua series of UF membranes. Designed with the same form factor of the Agua 55, the Agua 64 achieves higher flows, with increased fiber packing density and higher effective surface area, thereby providing greater throughput and value in the same footprint. The ingenious design ensures that Agua 64 modules can be installed in existing membrane skids that house Agua 55 modules - so, when membrane is replaced, the skid is upgraded in terms of handling capacity and flow per day while retaining the same footprint. Theway has also developed the Agua 75 module which will launch soon. These modules are suited for process and potable water ultrafiltration. This module is also suited for Effluent treatment. Module is suitable for Crossflow as well as Dead end filtration. Crossflow is recommended for longer and sustainable operation. Consult Theway Membranes for design and suitability. Read more about this membrane module by clicking on the button below.
bottom of page